športove sanie Project-R1 air intake mqb 1.8-2.0
Kategória:
Náhradné diely
intake system with air intake Project R1 for vehicles with 1.8 TSI & 2.0 TSI EA888 Gen3 engine.
Provides maximum performance along with a bright visual addition to your under-hood space.
The special design of the air intake without restrictive partitions allows you to direct cold air directly to the filter without heating and mixing with hot air from the engine compartment.
The housing has a dynamic air intake technology, thanks to the incoming flow of cold air, this is an undeniable advantage compared to traditional intake systems, as well as open ones from other tuners.
It comes complete with a proprietary R1 "Twin Air" filter. (one of the best filters according to the test results, an article about our filters)
Optionally, you can purchase an inlet pipe, it completely replaces the standard inlet pipe of the OEM intake, removing all partitions and narrowing thereby reducing turbulence and allowing a larger volume of air to reach turbocharging faster, which is especially important at stage 2-3 and higher.
It is installed in standard fasteners and air intakes on the panel.
Features:
Improved performance
Improves airflow efficiency
Allows you to increase the sensitivity of the throttle
Possibility of installation with a replacement restrictor
There is a damper corrugation to compensate for the rolling of the engine
Support for Stage 3 and above
Mounting to the panel in the standard holes (two channels) with screws
Significant superiority over sawn air intakes, "zero" in the standard box, and aftermarket air intakes.
Provides maximum performance along with a bright visual addition to your under-hood space.
The special design of the air intake without restrictive partitions allows you to direct cold air directly to the filter without heating and mixing with hot air from the engine compartment.
The housing has a dynamic air intake technology, thanks to the incoming flow of cold air, this is an undeniable advantage compared to traditional intake systems, as well as open ones from other tuners.
It comes complete with a proprietary R1 "Twin Air" filter. (one of the best filters according to the test results, an article about our filters)
Optionally, you can purchase an inlet pipe, it completely replaces the standard inlet pipe of the OEM intake, removing all partitions and narrowing thereby reducing turbulence and allowing a larger volume of air to reach turbocharging faster, which is especially important at stage 2-3 and higher.
It is installed in standard fasteners and air intakes on the panel.
Features:
Improved performance
Improves airflow efficiency
Allows you to increase the sensitivity of the throttle
Possibility of installation with a replacement restrictor
There is a damper corrugation to compensate for the rolling of the engine
Support for Stage 3 and above
Mounting to the panel in the standard holes (two channels) with screws
Significant superiority over sawn air intakes, "zero" in the standard box, and aftermarket air intakes.
